What are the reasons why the self feeding mixer cannot start normally?
1、 If you only hear the electromagnetic switch of the starter "cluck" when starting, but the crankshaft does not rotate, it may be caused by the "broken grid" of the battery.
2、 If the pole post and pole post clamp are not in good contact with each other and burn out, the mobile automatic feeding mixer will suddenly turn powerless, accompanied by burning rubber smell or smoke from the battery.
3、 If there is only a slight "click" sound when starting, and there is no reaction after that, it can be that the starting relay is jammed.
4、 When the meshing cut-in surface of flywheel ring gear is deformed, the idling sound of collision between the driving gear of starter and flywheel ring gear of engine will appear.
5、 When the holding coil of the electromagnetic switch of the starter is wrongly connected to the power terminal or the three wires on the key switch are wrongly connected, as soon as the main switch of the power supply is connected to the mixing, the reason why the charging mixer can not be started normally will appear that the driving gear of the starter and the flywheel ring gear will rotate together.
The above is about the reason why the charging mixer cannot start normally. I hope it will help you. If you want to know more about it, please click here http://www.skippers-products.com Home page of the official website.