|
|
|
|
|
|
| Q.
A. |
What is this
product?
After years of research, we have
developed a revolutionary new acrylic coating that gives instant shine and
long-lasting protection to older fiberglass. It's so easy, you just wipe it on
and walk away. Because this is such a unique new product, it is extremely
important that you follow the directions for best results.
|
|
Q.
A. |
Does NEW GLASSTM protect against rust and salt?
The protective cover helps protect
against rust and salt, gelcoat blisters and hairline cracking by locking in a
weather-tight layer which seals out harmful elements. |
|
|
|
|
|
| Q.
A. |
How long does it
take to dry?
Surface drying occurs in 30 seconds.
However, additional curing continues for one day. It is during this time that
the acrylic bonding action which provides the long-lasting protection occurs. |
|
Q.
A. |
How and when do I
wash my fiberglass after I have used NEW GLASSTM ?
For best results, wait 2-3 days. then
rinse or wash fiberglass. Do not use hard brushes or detergents containing
ammonia.
|
| Q.
A. |
How long
does NEW GLASSTM
last?
NEW GLASSTM will continue shining and protecting your fiberglass
for 12 to 24 months, depending on climate, application procedure and
environmental conditions.
|
|
Q.
A. |
If I wanted to
remove NEW GLASSTM how would I
do it?
NEW GLASSTM can
be removed with ammonia and scrub pad or an acrylic wax stripper.
|
| Q.
A. |
What colours does it work on?
NEW GLASSTM makes all colours shine better. In addition to a
great shine, all faded colours look deeper and more even.
|
|
Q.
A. |
Can it build up like other
waxes?
NEW GLASSTM will not build up, as a second or third application seals
the gel coat. Just be sure to carefully clean the boat before reapplying, and
follow directions completely. apply additional coats to achieve shine desire.
|
| Q.
A. |
Can I apply a
second coat for even greater shine and protection?
Yes. It is necessary to apply 4 coats
minimum. |
|
Q.
A. |
Can I wax over it?
There is no need to wax over NEW GLASSTM because it gives greater shine and protection than
any wax. However, if for some reason you choose to wax over NEW GLASSTM we
suggest waiting one month.
|
| Q.
A. |
How does it work on fiberglass,
clear coat or metallic finishes?
Because it contains no abrasive agents,
NEW GLASSTM is especially suited for fiberglass, clear coat and metallic
finishes. It provides unsurpassed shine and protection to all finishes. Put on
after chrome and brass cleaning. |
|
Q.
A. |
How do I touch up spots I
missed?
Wait until dry, then missed spots can be
touched up with NEW GLASSTM. If it dries however, to touch up spots, make sure
surface is clean and free of dust. Wash and dry, if necessary. then apply NEW GLASSTM. to applicator. Using very LIGHT
pressure ONE COAT as indicated in directions in section #4, minimizing
overlap. Colour differences will even out in 24 to 48 hours. |
 |
|
|
|
|
|
