1.每次裝料前用水沖洗進料口,使進料口在裝料時保持濕潤
Flush the feed inlet with water before each loading to keep it moist during loading
2.在裝料的同時向隨車自帶的清洗用水水箱中注滿水
Fill the cleaning water tank with water while loading
3.裝料后沖洗進料口,洗凈進料口附近殘留的混凝土
After loading, wash the feed port, and clean the remaining concrete near the feed port
4.到工地卸料后,沖洗出料槽,然后向混凝土貯罐內加清洗用水30—40 L;在車輛回程時保持混凝土貯罐正向慢速轉動
After unloading at the construction site, wash the discharge tank, and then add 30-40 l of cleaning water into the concrete storage tank; keep the concrete storage tank in forward and slow rotation when the vehicle returns

5.下次裝料前切記放掉混凝土貯罐內的污水
Remember to drain the sewage in the concrete tank before the next loading
6.每天收工時清洗混凝土貯罐及進出料口周圍,保證不粘有水泥及混凝土結塊
At the end of each day, clean the concrete storage tank and the area around the material inlet and outlet to ensure that there is no cement and concrete caking